HP EliteBook G7 Maintenance and Service Guide - Page 65
Fan
View all HP EliteBook G7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
3. Use a tool to release the module (3), and then remove the module from the computer (4). The module is secured with adhesive. Fan Reverse this procedure to install the NFC module. To remove the fan, use this procedure and illustration. Table 6-10 Fan description and part number Description Fan assembly Spare part number M07102-001 Before removing the fan, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 35). 2. Remove the bottom cover (Bottom cover on page 35). 3. Disconnect the battery cable from the system board (see Battery on page 45). Remove the fan assembly: 1. Disconnect the fan cable from the system board (1). 2. Remove the cables from the clips on the side of the fan (2). Component replacement procedures 55