HP EliteBook G7 Maintenance and Service Guide - Page 63
Touchpad
View all HP EliteBook G7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
3. Remove the fingerprint reader board from the computer (4). Reverse this procedure to install the fingerprint reader board. Touchpad To remove the touchpad, use this procedure and illustration. Table 6-8 Touchpad description and part number Description Touchpad Touchpad with NFC antenna Touchpad cable (included in Cable Kit) Spare part number M08521-001 M08522-001 M08526-001 Before removing the touchpad, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 35). 2. Remove the bottom cover (Bottom cover on page 35). 3. Remove the battery (see Battery on page 45). Remove the touchpad: 1. Disconnect the cable from the ZIF connector on the touchpad (1). 2. Lift the tape from the touchpad (2). 3. Disconnect the cable from the reverse ZIF connector on the NFC module (3). 4. Remove the six Phillips M1.6 × 1.8 screws (4) that secure the touchpad to the computer. Component replacement procedures 53