HP EliteOne 1000 Maintenance and Service Guide - Page 34
forward until it locks in place, Removal and replacement procedures
View all HP EliteOne 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
7. Install the four mounting screws that were removed from the old drive in the sides of the new hard drive. 8. Connect the cable to the rear of the hard drive (1). Then align the mounting screws on the drive with the J-slots on the sides of the drive bay and press the drive into the drive bay. And then slide the drive forward until it locks in place (2). 26 Chapter 4 Removal and replacement procedures
7.
Install the four mounting screws that were removed from the old drive in the sides of the new hard drive.
8.
Connect the cable to the rear of the hard drive
(1)
. Then align the mounting screws on the drive with the
J-slots on the sides of the drive bay and press the drive into the drive bay. And then slide the drive
forward until it locks in place
(2)
.
26
Chapter 4
Removal and replacement procedures