HP EliteOne 1000 Maintenance and Service Guide - Page 43
Antennas, and auxiliary
View all HP EliteOne 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Antennas The antenna cables route from the WLAN module to antennas at the top of the computer. The antennas are secured to the computer with adhesive. To remove the antennas: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 16). 2. Remove the base unit rear and front access panels (see Base unit access covers on page 17). 3. Remove the left speaker (see Speakers on page 34). 4. Disconnect the main (1) and auxiliary (2) antenna cables from the WLAN module. 5. Remove the cables from the clips along the routing path (3). 6. Peel the auxiliary (4) and main (5) antennas off the frame. To install the antenna, reverse the removal procedures. NOTE: When connecting the antennas cables, be sure to match the numbers on the cable with the same number printed on the WLAN module. Antennas 35