HP EliteOne 1000 Maintenance and Service Guide - Page 39
Webcam, To install a webcam when a webcam blank is installed in the webcam slot on the display head
View all HP EliteOne 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Webcam To replace the webcam: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 16). 2. Insert a paper clip into the release holes on each side of the webcam (1) to disengage the internal latches, and then pull the webcam out of the display head (2). 3. Insert the new webcam into the webcam slot on the display head and press the webcam down so that it engages the internal latches. 4. Reconnect the power cord and any external devices, and then turn on the computer. To install a webcam when a webcam blank is installed in the webcam slot on the display head: 1. Prepare the computer for disassembly (see Preparing to disassemble the computer on page 16). 2. Remove the display head rear panel (see Display head rear panel on page 30). Webcam 31