HP Evo n410c Compaq Evo Notebook N410c Series Hardware Guide - Page 65
Connecting an Optional External MultiBay
View all HP Evo n410c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
External Device Connections Connecting an Optional External MultiBay 1. Connect the single-connector end of the External Multibay Powered USB Cable 1 to the external multibay connector. Be sure the pin on the connector is inserted completely in the pin slot. 2. Connect the USB connector on the other end of the cable 2 to the USB connector on the External MultiBay. 3. Connect the 5-volt plug 3 to the power connector on the External MultiBay. Hardware Guide 7-9
External Device Connections
Hardware Guide
7–9
Connecting an Optional External MultiBay
1. Connect the single-connector end of the External Multibay
Powered USB Cable
1
to the external multibay connector.
Be sure the pin on the connector is inserted completely in the
pin slot.
2.
Connect the USB connector on the other end of the cable
2
to the USB connector on the External MultiBay.
3. Connect the 5-volt plug
3
to the power connector on the
External MultiBay.