HP Evo n410c Compaq Evo Notebook N410c Series Hardware Guide - Page 77
Lift the edge of the board, and gently slide it out of
View all HP Evo n410c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Notebook Upgrades and Add-ons 8. If a modem/NIC board is already installed, disconnect the modem/NIC cable from the board 1. 9. Remove the board by pulling away the plastic retention clips 2 on each side of the board. The board tilts upward. 10. Lift the edge of the board 3 and gently slide it out of the connector at a 45-degree angle. 11. Place the board in an electrostatic-safe container. Hardware Guide 8-11
Notebook Upgrades and Add-ons
Hardware Guide
8–11
8. If a modem/NIC board is already installed, disconnect the
modem/NIC cable from the board
1
.
9. Remove the board by pulling away the plastic retention
clips
2
on each side of the board. The board tilts upward.
10. Lift the edge of the board
3
and gently slide it out of the
connector at a 45-degree angle.
11. Place the board in an electrostatic-safe container.