HP GbE2c HP BladeSystem c7000 Enclosure Maintenance and Service Guide - Page 37
Identify the proper half-height or full-height blade in the enclosure Device bay numbering
UPC - 808736802215
View all HP GbE2c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Item 1 2 3 4 Description Blade Zone 1 Blade Zone 2 Blade Zone 3 Blade Zone 4 Storage blades and tape blades can be installed in the same quadrant as both full-height and half-height blades. A bracket ships with each SB40c Storage Blade that allows a half-height blade to be mounted on top of the storage blade. The lower tape or storage blade cannot be removed without first removing the upper half-height blade. To remove the component: 1. Identify the proper half-height or full-height blade in the enclosure ("Device bay numbering" on page 61). 2. Back up all data. 3. Power down the half-height or full-height blade ("Power down the server blades or workstation blades" on page 30). 4. Remove the blade: Removal and replacement procedures 37
Removal and replacement procedures
37
Item
Description
1
Blade Zone 1
2
Blade Zone 2
3
Blade Zone 3
4
Blade Zone 4
Storage blades and tape blades can be installed in the same quadrant as both full-height and half-height
blades. A bracket ships with each SB40c Storage Blade that allows a half-height blade to be mounted on
top of the storage blade.
The lower tape or storage blade cannot be removed without first removing the upper half-height blade.
To remove the component:
1.
Identify the proper half-height or full-height blade in the enclosure ("Device bay numbering" on page
61).
2.
Back up all data.
3.
Power down the half-height or full-height blade ("Power down the server blades or workstation
blades" on page 30).
4.
Remove the blade: