HP Hx2795b HP iPAQ hx2000 Pocket PC Series Additional Product Information - Page 13
Charging the Battery with the HP Desktop Cradle and USB, Cable, on the HP, Start, Settings, System - bluetooth
UPC - 882780109827
View all HP Hx2795b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Charging the Battery with the HP Desktop Cradle and USB Cable An alternative method of charging the HP iPAQ is to charge the device by using a USB cable. However, because this charging method drains the host battery (i.e., laptop), you must enable USB charging on the HP iPAQ before you can charge the device. To charge your HP iPAQ using the HP Desktop Cradle and USB Cable: 1. Turn on USB charging by tapping Start > Settings > System tab > Power on the HP iPAQ. 2. Select the USB Charging tab, and then check Use USB Charging. 3. Tap OK once USB Charging has been enabled. 4. Connect one end of the USB sync cable to the bottom of the HP iPAQ. 5. Connect the USB cable to an available USB port on your USB powered device, such as a laptop computer. NOTE: The HP iPAQ charges slower when using an USB cable than with an AC Adapter. If the battery won't stay charged, try the following: • Always keep the HP iPAQ connected to the AC Adapter when you are not using it. • In the backlight settings, adjust the bar to a lower level to conserve more battery power. • Turn off Bluetooth and Wi-Fi when not in use. Continued 3