HP Integrity rx8620 Installation (Smart Setup) Guide, Windows Server 2003, v6. - Page 21
Set up an Integrated Remote Console (rx2660, rx3600, BL860c, rx7640
View all HP Integrity rx8620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
8. The set up is complete. Proceed to the GUI Console installation process: "Install from a GUI Console" (page 34). To install the HP Graphics and USB Combo Card using the Enhanced interface (gray background), complete the following steps: 1. Install the HP Graphics and USB Combo Card in an open PCI slot of the server. 2. Connect a VGA monitor, USB HP keyboard, and USB mouse to the relevant ports. 3. Boot the server to EFI. 4. From the EFI Boot Manager, select Boot Configuration. 5. Select Console Configuration. 6. Select Select Output Console. 7. Select the graphics card PCI device and press Enter. The video display is now directed to the GUI console. 8. The set up is complete. Proceed to the GUI Console installation process: "Install from a GUI Console" (page 34). Set up an Integrated Remote Console (rx2660, rx3600, rx6600, BL860c, BL870c, rx7640, rx8640, and Superdome/sx2000 Servers Only) The Integrated Remote Console (IRC) lets you use Windows clients running Internet Explorer to remotely view and manage HP Integrity servers featuring the iLO 2 management processor. This functionality is supported on rx2660, rx3600, rx6600, BL860c, and BL870c servers only. It is also supported on rx7640, rx8640, and Superdome/sx2000 servers when the HP Lights Out Advanced KVM card is installed (part number: AD307A). The IRC combines keyboard, video, and mouse into a remote, virtual interface. Use it to view the server display and interact with it. When you use IRC in combination with Virtual Media (See "Set up a Virtual Media (vMedia) Drive" (page 22)), you can perform remote GUI installations of server operating systems and software. You can also use the IRC to perform server maintenance tasks and run applications remotely that require keyboard and mouse input. NOTE: You can use the IRC in place of the GUI Console method of installation anywhere the GUI method is described in this document. The IRC and vMedia features are enabled only after you obtain and install an iLO 2 MP Advanced Pack license (part number AB500A). If you are not licensed and try to use these features, the message: iLO 2 feature not licensed appears. Free limited-term trial licenses are available. For more information about the iLO 2 MP Advanced Pack licensing or to obtain a free limited-term license, go to: http://h71028.www7.hp.com/enterprise/cache/279991-0-0-0-121.html. For more information about iLO 2 functionality on HP rx7640, rx8640, and Superdome/sx2000 servers using the HP Lights Out Advanced KVM card, go to: http://www.hp.com/products1/serverconnectivity/misc/ iLOADVKVMCard.html?jumpid=reg_R1002_USEN Follow the factory installation or manual installation instructions located on the Integrated Lights-Out Advanced Pack for HP Integrity Servers; Certificate of License to Use; License Installation Card to activate your license. This document does not provide a complete description of IRC or vMedia. For more information about these powerful features, see the HP Integrity iLO 2 MP Operations Guide: http://docs.hp.com/en/5991-6005/5991-6005.pdf To set up an IRC (on rx2660, rx3600, rx6600, BL860c, BL870c, rx7640, rx8640, and Superdome/sx2000 servers only), complete the following steps: 1. Using a secure web browser, enter the name or IP address of the server MP. Task 6: Set up an Installation Method 21