HP LC2000r HP Netserver LP 1000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 43
Remote Control Card, The HP Netserver LP 1000r supports the HP Remote Control PCI card, which makes
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 5 Installing Additional Boards Remote Control Card The HP Netserver LP 1000r supports the HP Remote Control (PCI) card, which makes use of the HP TopTools remote management software. The Remote Control card requires an I2C connection to the system board, which is provided by the I2C connector on the daughter board (Integrated Remote Assistant circuitry) installed onto the system board. See Figures 5-1 and 5-2. Integrated Remote Assistant Board (daughter board) I2 C Connector NOTE Figure 5-1. Integrated RA Board Connector (I2C) The daughter board has the circuitry for Integrated Remote Assistant (Integrated RA) and the I2C connector for connection to a Remote Control board. For more information on the use of the HP TopTools function, refer to Chapter 10, "Configuring the HP Netserver," and Chapter 11, "HP Netserver Online Documentation CD-ROM." 37