HP LC2000r HP Netserver LP 1000r (1.13, 1.26 & 1.40 GHz) User Guide - Page 48
Inserting PCI Board-Riser Board
View all HP LC2000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 5 Riser Board Installed Installing Additional Boards Latch PCI Slot Figure 5-5. Inserting PCI Board-Riser Board 12. Insert the PCI board and riser board into the PCI connector on the system board. See Figure 5-5. 13. Secure the PCI board into the slot opening between the two tabs and close the latch. See Figures 5-4 and 5-5. 14. If you have a longer PCI board, you must use the board clamp to install the board into the Netserver. See Figure 5-6. a. Raise the board clamp before installing the PCI board. See Figure 5-6. b. Install the PCI board into the Netserver, securing the PCI board into the slot opening between the two tabs. See Figures 5-4 and 5-5. c. Lower the PCI board onto the tab rests. See Figure 5-6. 42
Chapter 5
Installing Additional Boards
42
Riser Board
Installed
Latch
PCI
Slot
Figure 5-5. Inserting PCI Board-Riser Board
12. Insert the PCI board and riser board into the PCI connector on the system board. See
Figure 5-5.
13. Secure the PCI board into the slot opening between the two tabs and close the latch.
See Figures 5-4 and 5-5.
14. If you have a longer PCI board, you must use the board clamp to install the board
into the Netserver. See Figure 5-6.
a.
Raise the board clamp before installing the PCI board. See Figure 5-6.
b.
Install the PCI board into the Netserver, securing the PCI board into the
slot opening between the two tabs. See Figures 5-4 and 5-5.
c.
Lower the PCI board onto the tab rests. See Figure 5-6.