HP LH4r HP Netserver LXr 8500 PCI Hot Plug Utility Guide - Page 37

Hot Plug Slots and LEDs, Table 7. PCI Hot Plug LED Codes rear panel view

Get HP LH4r - NetServer - 256 MB RAM PDF manuals and user guides View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Chapter 2 PCI Hot Plug Utility for Novell NetWare PCI Hot Plug LED Indicators Attention (Amber) Power P10 P9 P8 P7 P6 P5 P4 P3 P2 P1 Figure 24. Hot Plug Slots and LEDs Table 7 decodes the LEDs for each PCI slot: Table 7. PCI (Hot Plug) LED Codes (rear panel view) Amber LED Off Green LED On On Off Slot Status Indicates This Status Ready Powered on, but no driver loaded for board. Do not remove the board from the slot. Powered On The PCI slot just power on, but the driver initiation is not complete yet. This only happens momentarily prior to completing driver loading. Do not remove the board from the slot. Active Power to the slot is on, and the slot is operating normally. Do not remove the board from the slot. Powered Off (wrong board or no board) Power to the slot is off, but the Amber LED is on, due to a failure in the Hot Replacement process. Typically this is the result of installing the wrong board, because the replacement board must be the same type as the original PCI board. This also occurs if the board is removed, emptying the slot, and power is turned on. You can safely remove the board from this slot. 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
Chapter 2
PCI Hot Plug Utility for Novell NetWare
33
PCI Hot Plug
LED Indicators
(Amber)
Power
Attention
P10
P9
P8
P7
P6
P5
P4
P3
P2
P1
Figure 24. Hot Plug Slots and LEDs
Table 7 decodes the LEDs for each PCI slot:
Table 7. PCI (Hot Plug) LED Codes (rear panel view)
Amber
LED
Green
LED
Slot
Status
Indicates This Status
Off
On
Ready
Powered on, but no driver loaded for board. Do not
remove the board from the slot.
Powered On
The PCI slot just power on, but the driver initiation is
not complete yet. This only happens momentarily prior
to completing driver loading. Do not remove the board
from the slot.
Active
Power to the slot is on, and the slot is operating
normally.
Do not remove the board from the slot.
On
Off
Powered
Off (wrong
board or no
board)
Power to the slot is off, but the Amber LED is on, due
to a failure in the Hot Replacement process.
Typically
this is the result of installing the wrong board, because
the replacement board must be the same type as the
original PCI board. This also occurs if the board is
removed, emptying the slot, and power is turned on.
You can safely remove the board from this slot.