HP LH4r HP Netserver LXr 8500 PCI Hot Plug Utility Guide - Page 38
Opening the PCI Hold-Down Latch, desired PCI slot.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Appendix B Warranty, Software License and Support Amber LED Off Green LED Off Slot Status Powered Off Indicates This Status Power to the slot is off. You can safely remove the board from this slot. 5. If not, go back to the software interface NCMCON and verify you have turned off power to the correct slot. 6. If you are unable to power down the slot, remove and install a PCI board in the Hot Plug slot as described in your Installation Guide. 7. Do not continue with this procedure, if you are unable to power down the desired PCI slot. CAUTION To prevent a system crash or hang do not open the PCI holddown latch, if you are unable to turn off power to the PCI slot, using the software interface (NCMCON). 8. Press the PCI hold-down latch to release the PCI board in the slot. See Figure 25. B. Pull latch to half open from rear. A. Push here to release (should click). Figure 25. Opening the PCI Hold-Down Latch 34