HP LH4r HP Netserver LXr 8500 PCI Hot Plug Utility Guide - Page 46
Amber, Green, Slot Status, Indicates This Status
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Appendix B Warranty, Software License and Support 5. Press any key to continue, except the "Esc" key, and NetWare will load the appropriate driver for the adapter board. All prompts disappear and the main menu appears with desired PCI Slot (P5) active. See Figure 33. Figure 33. Hot Plug Slot Powered On (Active) 6. If the main menu does not display with the desired PCI slot (P5) shown Active, verify the PCI board is properly seated in the slot. See the HP Help File. Refer to Table 8 to decode the PCI (Hot Plug) LED indicators. Table 8. PCI (Hot Plug) LED Code (rear panel view) Amber Green LED LED Slot Status Indicates This Status Off On Ready Powered on, but no driver loaded for board. Do not remove the board from the slot. Powered On The PCI slot just power on, but the driver initiation is not complete yet. This only happens momentarily prior to completing driver loading. Do not remove the board from the slot. 42