HP LaserJet 6p/mp Service Manual - Page 109
Remove the Feed Assembly., the wiring harness is connected to the DC Controller.
View all HP LaserJet 6p/mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Note Note 4 Remove the self-tapping screw that holds the Feed Assembly in place (Figure 6-36, callout 1). Before proceeding to Step 5, examine the tabs and how they fit into their slots (Figure 6-36, callout 2). The tabs must be reinstalled to exactly this position. The connector shown (Figure 6-36, callout 3) is not present on the HP LaserJet 6L Pro. On that model, the wiring harness is connected to the DC Controller. 5 Remove the Feed Assembly. 3 1 2 Figure 6-36 Feed Assembly removal (2 of 3) EN Top assemblies 107
EN
Top assemblies
107
4
Remove the self-tapping screw that holds the Feed Assembly in place (Figure 6-36, callout 1).
Note
Before proceeding to Step 5, examine the tabs and how they fit into their slots (Figure 6-36, callout 2).
The tabs must be reinstalled to exactly this position.
Note
The connector shown (Figure 6-36, callout 3) is not present on the HP LaserJet 6L Pro. On that model,
the wiring harness is connected to the DC Controller.
5
Remove the Feed Assembly.
Figure
6-36
Feed Assembly removal (2 of 3)
1
2
3