HP LaserJet 6p/mp Service Manual - Page 92
Paper Exit Sensor Flag, Remove the Printer Covers, Delivery Assembly s 6-9 and 6-10
View all HP LaserJet 6p/mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
CAUTION Note Paper Exit Sensor Flag 1 Remove the Printer Covers, Delivery Assembly (Figures 6-9 and 6-10), and Fuser Pressure Plate (Figure 6-11). Before proceeding to Step 2, examine the Paper Exit Sensor flag. It is important to note the position of the spring mechanism on the flag. The spring must be reinstalled to exactly this position. 2 Remove the Paper Exit Sensor flag by pressing down on the left side and pulling up on the right side. To reinstall It is important that you reinstall the flag correctly, because installing it incorrectly will cause the Control Panel to display an error with the Paper Exit Sensor (PS201). Place the left side of the flag in the correct position first, then slide the right side into place, making certain the spring is on top of the flag (Figure 6-19). If the spring exerts no pressure on the flag, it may require "re-springing" by giving the spring an extra turn before reinstalling. The flag should fit snugly in place. Figure 6-19 Paper Exit Sensor Flag replacement 90 Removal and replacement EN