HP LaserJet 6p/mp Service Manual - Page 34
Site requirements, Operating environment, LaserJet 5L/6L/6L Pro & Cartridge - windows 10
View all HP LaserJet 6p/mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Site requirements Operating environment The environmental requirements listed in the table below must be maintained to ensure the proper operation of this printer. Table 2-1 Environmental requirements LaserJet 5L/6L/6L Pro & Cartridge Operating Temperature 50 to 90.5° F (10 to 32.5° C) Humidity 20 to 80% RH (with no condensation) Storage 32 to 104° F (0 to 40° C) 10 to 80% RH (with no condensation) Consider the following points before installing the printer: l Install in a well-ventilated, dust-free area. l Install on a hard, flat and continuous surface, with all four printer feet level. Do not install on carpet or other soft surfaces. l Ensure adequate power is supplied. Printer power requirements are listed under "Specifications" in Chapter 1. Uninterruptible power supplies (UPS) should not be used with this printer. l Install away from direct sunlight, open flames, or ammonia fumes. If the printer is placed near a window, make sure the window has a curtain or blind to block any direct sunlight. l Install with enough space around the printer for proper access and ventilation. (See Figure 2-1.) l Install printer away from the direct flow of exhaust from air ventilation systems. 32 Site requirements EN