HP LaserJet 6p/mp Service Manual - Page 89
Pressure Roller, Remove Printer Covers, Delivery Assembly s 6-9 and 6-10
View all HP LaserJet 6p/mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Pressure Roller 1 Remove Printer Covers, Delivery Assembly (Figures 6-9 and 6-10), Fuser Pressure Plate (Figure 6-11), and Heating Element (Figures 6-13 through 6-15). 2 Remove the Pressure Roller guide by lifting the edge (Figure 6-16, callout 1) and then rolling it gently backward (Figure 6-16, callout 2). 1 2 Figure 6-16 Pressure Roller Guide removal 3 Lift the right end of the Pressure Roller up and out of the printer chassis. Note The right end of the Pressure Roller is greased. 4 The left side will follow easily with the Pressure Roller gear still attached. Note When reinstalling the Pressure Roller, apply a drop of grease to the grounding plate on the right side of the shaft. (Refer to Chapter 8 for a part number.) EN Internal assemblies 87