HP LaserJet 6p/mp Service Manual - Page 114
Release the Fusing Assembly connector J206 callout 1., ESD SENSITIVE
![]() |
View all HP LaserJet 6p/mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
CAUTION 8 Lift the bottom plate, rotating the plate toward you from the back as if hinged on the front. Release the Fusing Assembly connector (J206) (Figure 6-41, callout 1). ESD SENSITIVE! 1 Figure 6-41 DC Controller removal (2 of 3) 9 Remove the (7) remaining connectors (Figure 6-42, callout 1). CAUTION Some wiring connections on the HP LaserJet 6L Pro are soldered. Check each connection before you try to disconnect it to prevent breaking any soldered connections. 10 Remove the screws (5) that secure the DC Controller to the metal case (Figure 6-42, callout 2). 112 Removal and replacement EN
![](/manual_guide/products/hewlettpackard-laserjet-6pmp-service-manual-e05bf13/114.png)
112
Removal and replacement
EN
8
Lift the bottom plate, rotating the plate toward you from the back as if hinged on the front.
Release the Fusing Assembly connector (J206) (Figure 6-41, callout 1).
CAUTION
ESD SENSITIVE!
Figure
6-41
DC Controller removal (2 of 3)
9
Remove the (7) remaining connectors (Figure 6-42, callout 1).
CAUTION
Some wiring connections on the HP LaserJet 6L Pro are soldered. Check each connection before you
try to disconnect it to prevent breaking any soldered connections.
10
Remove the screws (5) that secure the DC Controller to the metal case (Figure 6-42, callout 2).
1