HP LaserJet 6p/mp Service Manual - Page 75
Covers and doors, Back Cover
View all HP LaserJet 6p/mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Covers and doors CAUTION Note Back Cover 1 Unplug the power cord and remove the parallel cable from the back of the printer. 2 Remove the toner cartridge. 3 Lift the Input Extender assembly. You must lift the Input Extender when the covers are removed or it will break. After you have removed the covers, leave the Input Extender in this lifted position for ease of replacement. The Input Extender for the HP LaserJet 6L Pro differs from the one shown in the photo. It does not have the extra extender for legal-size paper. 4 Remove the (3) screws (Figure 6-2, callout 1). 1 Figure 6-2 Back Cover removal (1 of 2) EN Covers and doors 73
EN
Covers and doors
73
Covers and doors
Back Cover
1
Unplug the power cord and remove the parallel cable from the back of the printer.
2
Remove the toner cartridge.
3
Lift the Input Extender assembly.
CAUTION
You must lift the Input Extender when the covers are removed or it will break. After you have removed
the covers, leave the Input Extender in this lifted position for ease of replacement.
Note
The Input Extender for the HP LaserJet 6L Pro differs from the one shown in the photo. It does not
have the extra extender for legal-size paper.
4
Remove the (3) screws (Figure 6-2, callout 1).
Figure
6-2
Back Cover removal (1 of 2)
1