HP LaserJet 6p/mp Service Manual - Page 79
Main Cover and Paper Input Assembly, Remove memory door HP LaserJet 5L and 6L.
View all HP LaserJet 6p/mp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
CAUTION Main Cover and Paper Input Assembly 1 Remove the toner cartridge. 2 Remove memory door (HP LaserJet 5L and 6L). Remove the memory door first (HP LaserJet 5L and 6L). The door will break if you remove the Main Cover without removing the memory door. 3 Remove the EP Door Assembly. 4 Remove the Back Cover. 5 Remove the (2) screws from the top of the printer (Figure 6-6, callout 1). 6 Grasp the two lower, front corners of the printer and pull gently outward to release the front of the Main Cover. 7 Lift the cover straight off. 8 Remove the Paper Input Assembly (Figure 6-6, callout 2) by rotating it forward and lifting it out with firm pressure. 2 1 Figure 6-6 Main Cover and Paper Input Assembly removal Note When replacing the Paper Input Assembly, make certain that the mylar sheet is positioned between the Input Feed Roller and Separation Pad and that the sheet is not folded or bent. EN Covers and doors 77