HP LaserJet Enterprise P3015 HP LaserJet P3010 Series - Software Technical Ref - Page 207
Remote firmware update by using the HP Printer Utility, File Upload, Upload
View all HP LaserJet Enterprise P3015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
The File Upload command is supported for file types that can be sent directly to the product without first being opened through a software program. Some files can be uploaded to the product, but some cannot. Documents in the following file formats can be printed by using a command line. That is, they do not need to be opened in a software program that supports the file format (such as the Adobe Acrobat or Acrobat Reader programs for .PDF files), but can be sent directly to the product by using the File Upload command. ● HP LaserJet printer command language (.PRN) ● Portable document format (.PDF) ● Postscript (.PS) ● Text (.TXT) On the File Upload screen, click Choose... to open a navigation screen. Locate the file you want to upload and click Open. On the File Upload screen, click Display response from the device to see whether the upload was successful. If the file loads successfully, no message appears. On the navigation screen, select the file and click Open. The file name appears in the File Upload screen of the HP Printer Utility. Click Upload. Remote firmware update by using the HP Printer Utility Make sure that you have the tools and files that are necessary for the update. You will need the HP Printer Utility and the P3010FW.RFU file, which is the firmware file for the product. The HP Printer Utility is a software program that is available only for Mac OS X v10.2 and later. The HP Printer Utility can be found on the HP LaserJet P3010 Series printing-system software CD-ROM that came with the product. If you do not have the CD-ROM, you can obtain the HP Printer Utility by downloading the latest product installer from www.hp.com/go/cljcp3525_software. The firmware file (P3010FW.RFU) can be downloaded from the following Web site: www.hp.com/go/cljcp3525_firmware See Downloading the new firmware to the product on page 206 for more information. After you have the firmware file and the HP Printer Utility, you are ready to begin the update process. Complete the following steps: 1. Open the HP Printer Utility. 2. Select File Upload, click Choose, browse to firmware upgrade file, and then click Open. 3. On the Update Firmware screen, click Update. NOTE: You might receive an error message on the screen indicating that the product is offline. Verify that the product is turned on. If it is, ignore the message. The Updating screen appears and the update proceeds as expected. 4. The update process can take several minutes. Let the process finish without further interaction with the product or the computer. The messages described in the section Printer messages during the firmware update on page 207 appear on the control panel. Macintosh ENWW HP Printer Utility for Macintosh 189