HP OMEN 17-cb0000 Maintenance and Service Guide - Page 42
Solid-state drive and Optane memory module, Remove the Phillips M2.0 × 4.0 screw
View all HP OMEN 17-cb0000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Solid-state drive and Optane memory module Table 5-2 Solid-state drive and Optane memory module descriptions and part numbers Description 1 TB, PCIe, Gen 3 × 4 512 GB, PCIe, Gen 3 × 4 512 GB, PCIe + 32 GB Optane memory 256 GB, PCIe, Gen 3 × 4 128 GB, PCIe, Gen 3 × 2 16 GB, PCIe, Gen 3 × 2 Optane memory module Spare part number L57387-001 L57386-001 L57388-001 L57385-001 L57384-001 L57383-001 Before removing the solid-state drive or Optane memory module, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 30). 3. Remove the battery (see Battery on page 38). The computer offers two solid-state drive sockets as shown in the following illustration: (1) Primary solid-state drive (2) Secondary solid-state drive Remove the solid-state drive or Optane memory module: 1. Remove the Phillips M2.0 × 4.0 screw (1), and then lift the metal cover off the drive (2). 32 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts