HP OMEN 17-cb0000 Maintenance and Service Guide - Page 53

Touchpad button board, Disconnect the cable from the ZIF connector on the system board

Get HP OMEN 17-cb0000 PDF manuals and user guides View all HP OMEN 17-cb0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

Touchpad button board Table 6-6 Touchpad button board description and part number Description Touchpad button board Spare part number L57343-001 Before removing the touchpad button board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 30). 3. Remove the battery (see Battery on page 38). Remove the touchpad button board: 1. Disconnect the cable from the ZIF connector on the touchpad (1). 2. Disconnect the cable from the ZIF connector on the system board (2). 3. Remove the four Phillips M2.0 × 3.0 screws (3) that secure the touchpad button board to the computer. 4. Remove the touchpad button board from the computer (4). Reverse this procedure to install the touchpad button board. Component replacement procedures 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Touchpad button board
Table 6-6
Touchpad button board description and part number
Description
Spare part number
Touchpad button board
L57343-001
Before removing the touchpad button board, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
29
).
2.
Remove the bottom cover (see
Bottom cover
on page
30
).
3.
Remove the battery (see
Battery
on page
38
).
Remove the touchpad button board:
1.
Disconnect the cable from the ZIF connector on the touchpad
(1)
.
2.
Disconnect the cable from the ZIF connector on the system board
(2)
.
3.
Remove the four Phillips M2.0 × 3.0 screws
(3)
that secure the touchpad button board to the computer.
4.
Remove the touchpad button board from the computer
(4)
.
Reverse this procedure to install the touchpad button board.
Component replacement procedures
43