HP OMEN 17-cb0000 Maintenance and Service Guide - Page 45

Hard drive assembly, Disconnect the hard drive cable from the system board ZIF connector

Get HP OMEN 17-cb0000 PDF manuals and user guides View all HP OMEN 17-cb0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Hard drive assembly Table 5-4 Hard drive and connector descriptions and part numbers Description Hard drive, 2 TB, 5400 rpm Hard drive, 1 TB, 7200 rpm Hard drive connector/cable Spare part number 912487-850 766644-001 L57362-001 Before removing the hard drive assembly, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 30). 3. Remove the battery (see Battery on page 38). Remove the hard drive assembly: 1. Disconnect the hard drive cable from the system board ZIF connector (1). 2. Remove the four Phillips M2.0 × 3.0 screws (2) that secure the hard drive assembly to the computer. 3. Lift the hard drive assembly out of the computer (3). Component replacement procedures 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Hard drive assembly
Table 5-4
Hard drive and connector descriptions and part numbers
Description
Spare part number
Hard drive, 2 TB, 5400 rpm
912487-850
Hard drive, 1 TB, 7200 rpm
766644-001
Hard drive connector/cable
L57362-001
Before removing the hard drive assembly, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
29
).
2.
Remove the bottom cover (see
Bottom cover
on page
30
).
3.
Remove the battery (see
Battery
on page
38
).
Remove the hard drive assembly:
1.
Disconnect the hard drive cable from the system board ZIF connector
(1)
.
2.
Remove the four Phillips M2.0 × 3.0 screws
(2)
that secure the hard drive assembly to the computer.
3.
Lift the hard drive assembly out of the computer
(3)
.
Component replacement procedures
35