HP OMEN 17-cb0000 Maintenance and Service Guide - Page 44

Memory module

Get HP OMEN 17-cb0000 PDF manuals and user guides View all HP OMEN 17-cb0000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

Memory module Table 5-3 Memory descriptions and part numbers Description Memory module, 16 GB Memory module, 8 GB Memory module, 4 GB Spare part number 937438-850 937236-850 L10598-850 Before removing the memory modules, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 29). 2. Remove the bottom cover (see Bottom cover on page 30). 3. Remove the battery (see Battery on page 38). Remove the memory modules: 1. Spread the two retention clips outward (1) until the memory module tilts up at a 45° angle. 2. Grasp the edge of the memory module (2), and then gently pull the module out of the slot. Use the same procedure to remove both memory modules. CAUTION: To prevent damage to the memory module, hold the memory module by the edges only. Do not touch the components on the memory module. To protect a memory module after removal, place it in an electrostatic-safe container. Reverse this procedure to install memory modules. 34 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Memory module
Table 5-3
Memory descriptions and part numbers
Description
Spare part number
Memory module, 16 GB
937438-850
Memory module, 8 GB
937236-850
Memory module, 4 GB
L10598-850
Before removing the memory modules, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
29
).
2.
Remove the bottom cover (see
Bottom cover
on page
30
).
3.
Remove the battery (see
Battery
on page
38
).
Remove the memory modules:
1.
Spread the two retention clips outward
(1)
until the memory module tilts up at a 45° angle.
2.
Grasp the edge of the memory module
(2)
, and then gently pull the module out of the slot. Use the same
procedure to remove both memory modules.
CAUTION:
To prevent damage to the memory module, hold the memory module by the edges only. Do
not touch the components on the memory module.
To protect a memory module after removal, place it in an electrostatic-safe container.
Reverse this procedure to install memory modules.
34
Chapter 5
Removal and replacement procedures for Customer Self-Repair parts