HP P4000 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV
HP P4000 Manual
 |
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP P4000 manual content summary:
- HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 1
Guide. For late-breaking information, HP recommends that you read the release notes for the installed software version. Obtain the latest version of this and other HP P4000 user documents by selecting Disk Storage Systems on the HP website www.hp.com/support/manuals and finding the HP P4000 G2 SAN - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 2
this product, see the warranty information website: http://www.hp.com/go/storagewarranty Revision History Revision 1 July 2010 First edition Revision 2 November 2010 Second edition-Updated with changes for the SAN/iQ software 9.0 release. Revision 3 March 2011 Third edition-Updated with - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 3
...18 RAID 10 disk replacement and rebuild behavior 18 Upgrading SAN/iQ software 19 Adding capacity to an existing P4800 G2 SAN 19 Upgrading firmware...19 4 Removing and replacing the HP P4800 G2 solution components 21 Additional component removal and replacement instructions 21 Identifying - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 4
and other resources 29 Contacting HP...29 Subscription service...29 HP Insight Remote Support software 29 Related information...30 HP websites...30 Rack stability...31 Customer self repair...31 Replaceable parts...31 A HP P4800 G2 solution cabling 32 B Regulatory compliance notices 36 Regulatory - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 5
French recycling notice...44 German recycling notice...44 Greek recycling notice...45 Hungarian recycling notice 45 Italian recycling notice...45 Latvian recycling notice...45 Lithuanian recycling notice 46 Polish recycling notice...46 Portuguese recycling notice 46 Romanian recycling notice 46 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 6
1 Overview The HP P4800 G2 SAN Solution for BladeSystem (HP P4800 G2 solution) base configuration is a 2-node SAN consisting of two HP P4460sb G2 storage blades and one disk enclosure. The storage blades run the SAN/iQ software, and the disk enclosure contains 70 disks. Up to six storage blades and - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 7
Figure 1 Front view: HP P4800 G2 solution 2 node 1. Blade enclosure (1) 2. HP P4460sb G2 storage blades (2) 3. HP BladeSystem Insight Display (1) 4. Disk enclosure (1) Hardware configuration 7 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 8
Figure 2 Front view: HP P4800 G2 solution 4 node 1. Blade enclosure (1) 2. HP P4460sb G2 storage blades (4) 3. HP BladeSystem Insight Display (1) 4. Disk enclosures (2) 8 Overview - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 9
Figure 3 Front view: HP P4800 G2 solution 6 node 1. Blade enclosure (1) 2. HP P4460sb G2 storage blades (6) 3. HP BladeSystem Insight Display (1) 4. Disk enclosures (3) Hardware configuration 9 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 10
for BladeSystem Quick Start Guide. For links to the latest manuals for HP BladeSystem and other components, see the HP P4800 G2 SAN Solution for BladeSystem Documentation CD. For detailed instructions about using the HP P4800 G2 SAN Solution for BladeSystem, see the following resources: 10 Overview - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 11
. • HP P4000 SAN Solution User Guide Find complete instructions for configuring and managing storage systems and clustered storage volumes in the User Guide. The User Guide is available in PDF format, installed in the same directory as the Centralized Management Console program files. • HP P4000 VSA - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 12
HP P4800 G2 solution, and immediately after making changes to an existing configuration or replacing a component. You must back up each component (for example, the VC Flex-10 module) separately. Backing up or restoring the Virtual Connect domain configuration Use the Virtual Connect Manager firmware - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 13
up and restoring the SAS configuration using the CLI, see the HP Virtual SAS Manager User Guide. IMPORTANT: HP recommends that you not change the SAS zoning on the SAS switches or the cabling between the SAS switches and the disk enclosures. See "HP P4800 G2 solution cabling" (page 32) for the - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 14
LEDs for P700m model" in the HP Smart Array Controllers for HP ProLiant Servers User Guide. HP 3Gb SAS BL Switch user guide HP 600 Modular Disk System Maintenance and Service Guide HP BladeSystem c-Class Enclosure Troubleshooting Guide CMC does not detect drives Symptom • The storage blade will not - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 15
installed on the HP P4800 G2 solution • USB flash drive, formatted with a Windows FAT 32 file system (this is the default for Windows XP) • HP StorageWorks P4800 Storage System Quick Restore CD • HP SmartStart CD x64 • HP StorageWorks P4000 Storage System SAN/iQ Management Software DVD Performing - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 16
key" (page 16). 6. Image the SAN/iQ software. Imaging the storage blade with the SAN/iQ software If you do not have the license key, start with the instructions, "Obtaining a license key" (page 16), for obtaining the MAC address and license key. To image the storage blades, perform the steps in the - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 17
Smart Array P410i controller Memory NIC 24 GB For the HP P4460sb G2 storage blade, the Network Controller is Emulex OneConnect 10Gb NIC: v3.102.453.0 or later. 9. From the Categories list, select Storage. 10. Verify that the specified item meets the minimum requirements listed in Table 3 (page 17 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 18
Install the CMC from the HP StorageWorks P4000 Storage System SAN/iQ Management Software DVD. Open the CMC, HP P4000 SAN Solution User Guide. RAID 10 disk replacement and rebuild behavior The RAID 10 configuration includes a single hot spare in bay 35. When a disk is removed or fails in a RAID 10 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 19
existing SAN, upgrade to the latest SAN/iQ software. Otherwise, the new nodes will operate at the older software version. Customer requirements Before beginning the equipment installation, the customer must perform the following actions: • Disconnect iSCSI sessions from the SAN volumes and snapshots - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 20
the disk enclosure drive firmware. • Upgrading the SAS switch firmware • Upgrading the VC Flex-10 firmware • Upgrading the storage blade firmware If a volume is not replicated, upgrades to the storage blade firmware and OA firmware (BIOS) will take the volume offline. 20 Maintaining the HP P4800 G2 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 21
modules on the disk enclosure, first power down the HP P4460sb G2 storage blades using the procedures to shut down the management group in the CMC OnlineHelp or HP P4000 SAN Solution User Guide. Replacing the storage blade and storage blade components For more detailed instructions on replacing the - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 22
disk enclosure in HP P4800 G2 solution systems. If you do, nodes will lose failover ability and you may lose connectivity to the disks and network. WARNING! For cooling practices from the CMC, see the "Powering off the storage system" instructions in the HP P4000 SAN Solution User Guide. 2. Note - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 23
, the system disk is lost and you must restore the storage blade. To reinstall a storage blade: 1. Remove both disk drives. 2. Insert two replacement drives. 3. Reinstall the storage blade by following the quick restore instructions, see "Performing field system recovery of the HP P4800 G2 solution - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 24
data. 3. Close all applications. 4. Power down the storage blade using the CMC. Wait at least 1 minute for the blade to power down. This procedure flushes all data from the cache. To power down the storage blade from the CMC, see the "Powering off the storage system" instructions in the HP P4000 SAN - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 25
Firmware DVD located at hp.com/support and drivers. For detailed instructions, see "Installing a mezzanine controller in a previously configured server blade" in the HP Smart Array Controllers for HP ProLiant Servers User Guide. For instructions on replacing the battery and cache, see "Upgrading - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 26
I/O module. 1. Before disconnecting a SAS cable, power down the HP P4460sb G2 storage blades using the procedures to shut down the management group in the CMC OnlineHelp or HP P4000 SAN Solution User Guide. 2. Manually power off the disk enclosure. 3. Replace the SAS cable. 26 Removing and replacing - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 27
and replace the disk enclosure I/O module on the HP P4800 G2 solution. CAUTION: Before replacing the I/O module, be sure to power down the HP P4460sb G2 storage blades using the procedures to shut down the management group in the CMC OnlineHelp or HP P4000 SAN Solution User Guide. In addition, be - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 28
down the management group in the CMC OnlineHelp or HP P4000 SAN Solution User Guide. IMPORTANT: Before pulling a drive out of the disk enclosure, HP recommends that you use the CMC to turn on the drive LED so that you can physically identify the correct drive to replace. For detailed instructions on - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 29
with a management platform. • HP Insight Remote Support Advanced: This software provides comprehensive remote monitoring and proactive service support for nearly all HP servers, storage, network, and SAN environments, plus selected non-HP servers that have a support obligation with HP. It is - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 30
Disk System). It should only be used by persons qualified to service computer equipment. You can find these documents on the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals To locate a HP P4800 G2 solution document, see "Documentation available" (page 10 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 31
, contact your local service provider, or see the CSR website: http://www.hp.com/go/selfrepair Replaceable parts This product contains replaceable parts. To identify the replaceable parts, see the individual component guides listed in "Component removal and replacement instructions" (page 21). Parts - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 32
The HP P4800 G2 solution SAS cabling is shown in Figure 10 (page 32) through Figure 13 (page 35). Figure 10 HP P4800 G2 solution 2-node cabling 1. HP VC Flex-10 modules (2) 2. HP 3Gb SAS BL switches (2) 3. HP ProLiant Onboard Administrator 4. Disk enclosure power on button 32 HP P4800 G2 solution - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 33
Figure 11 HP P4800 G2 solution 4-node cabling 1. HP VC Flex-10 modules (2) 2. HP 3Gb SAS BL switches (2) 3. HP ProLiant Onboard Administrator 4. Disk enclosure power on buttons (2) 33 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 34
Figure 12 HP P4800 G2 solution 6-node cabling 1. HP VC Flex-10 modules (2) 2. HP 3Gb SAS BL switches (2) 3. HP ProLiant Onboard Administrator 4. Disk enclosure power on buttons (3) 34 HP P4800 G2 solution cabling - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 35
Figure 13 HP P4800 G2 solution 8-node cabling 1. HP VC Flex-10 modules (2) 2. HP 3Gb SAS BL switches (2) 3. HP ProLiant Onboard Administrator 4. Disk enclosure power on buttons (4) 35 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 36
contains regulatory notices for the HP P4800 G2 SAN Solution for BladeSystem. Regulatory protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 37
following EU directives: • Low Voltage Directive 2006/95/EC • EMC Directive 2004/108/EC Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 38
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g., Bluetooth). Certificates can be obtained from http://www.hp.com/go/certificates. Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany Japanese notices Japanese VCCI-A notice Japanese - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 39
Class B equipment Taiwanese notices BSMI Class A notice Taiwan battery recycle statement Turkish recycling notice Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur Taiwanese notices 39 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 40
or performance of procedures other than those specified herein or in the laser product's installation guide may serviceable components inside. • Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein. • Allow only HP Authorized Service - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 41
German laser notice Italian laser notice Japanese laser notice Laser compliance notices 41 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 42
household in the European Union This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 43
Bulgarian recycling notice Czech recycling notice Likvidace zařízení v domácnostech v Evropské unii Tento symbol znamená, že nesmíte tento produkt likvidovat spolu s jiným domovním odpadem. Místo toho byste měli chránit lidské zdraví a životní prostředí tím, že jej předáte na k tomu určené sbě - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 44
remettant à une déchetterie effectuant le recyclage des équipements électriques et électroniques. Pour de plus amples informations, prenez contact avec votre service d'élimination des ordures ménagères. German recycling notice Entsorgung von Altgeräten von Benutzern in privaten Haushalten in der EU - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 45
Greek recycling notice Hungarian recycling notice A hulladék anyagok megsemmisítése az Európai Unió háztartásaiban Ez a szimbólum azt jelzi, hogy a készüléket nem szabad a háztartási hulladékkal együtt kidobni. Ehelyett a leselejtezett berendezéseknek az elektromos vagy elektronikus hulladék á - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 46
Lithuanian recycling notice Nolietotu iekārtu iznīcināšanas noteikumi lietotājiem Eiropas Savienības privātajās mājsaimniecībās Šis simbols norāda, ka ierīci nedrīkst utilizēt kopā ar citiem mājsaimniecības atkritumiem. Jums jārūpējas par cilvēku veselības un vides aizsardzību, nododot lietoto aprī - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 47
Slovak recycling notice Likvidácia vyradených zariadení používateľmi v domácnostiach v Európskej únii Tento symbol znamená, že tento produkt sa nemá likvidovať s ostatným domovým odpadom. Namiesto toho by ste mali chrániť ľudské zdravie a životné prostredie odovzdaním odpadového zariadenia na - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 48
French battery notice German battery notice 48 Regulatory compliance notices - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 49
Italian battery notice Japanese battery notice Battery replacement notices 49 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 50
Spanish battery notice 50 Regulatory compliance notices - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 51
FOM iLO 2 iSCSI KVM LUN NIC OA POST RBSU RF SAN SAS SFF SSH UPS VIP Central Management Console Customer Self Repair Dynamic Host Configuration Protocol Enclosure bay IP addressing VMware's enterprise-class virtualization platform Flash-backed write cache Federal Communications Commission Failover - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 52
, 30 52 Index documentation available, 10 E European Union notice, 37 F Federal Communications Commission notice, 36 firmware upgrades, 19 firmware upgrade, 21 Flex-10 module replacing, 25 Flex-10 module, replacing, 25 H hard drive disk enclosure, 28 help obtaining, 29 HP technical support, 29 - HP P4000 | 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 53
's Choice, HP, 29 support software, remote, 29 T Taiwanese notices, 39 technical support HP, 29 service locator website, 30 troubleshooting BIOS reset, 14 components, 14 HP P4800 G2 solution, 14 specific issues, 14 U upgrading firmware, 21 utility system backup, 13 V VC Flex-10 module bays
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
 |
 |
HP
P4800 G2 SAN Solution for BladeSystem
Maintenance Guide
Abstract
This guide explains how to back up, restore, upgrade, and otherwise maintain the HP P4800 G2 SAN Solution for BladeSystem.
The intended audience is system administrators and technicians with experience managing and repairing networked storage.
For installation and configuration information, see the
HP P4800 G2 SAN Solution for BladeSystem Quick Start Guide
. For
day-to-day operations, see the
HP P4000 SAN Solution User Guide
. For late-breaking information, HP recommends that you
read the release notes for the installed software version.
Obtain the latest version of this and other HP P4000 user documents by selecting Disk Storage Systems on the HP website
w
w
w
.hp
.co
m/su
ppo
r
t/man
uals
and finding the HP P4000 G2 SAN Solution.
HP Part Number: BV931-96005
Published: March 2011
Edition: Third