HP P4000 9.0.01 HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide (BV - Page 13
Backing up the SAS switch, Backing up remaining HP P4800 G2 solution configurations
View all HP P4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Figure 5 Virtual Connect Manager Domain Settings Backing up the SAS switch The SAS switch configuration cannot be backed up using the CMC. If replacing one SAS switch, duplicate the configuration from the other switch. If replacing both SAS switches, you will need to restore the configuration from a backup captured using the VSM CLI. For information about backing up and restoring the SAS configuration using the CLI, see the HP Virtual SAS Manager User Guide. IMPORTANT: HP recommends that you not change the SAS zoning on the SAS switches or the cabling between the SAS switches and the disk enclosures. See "HP P4800 G2 solution cabling" (page 32) for the recommended cabling. Backing up remaining HP P4800 G2 solution configurations The following methods may be used to back up the remaining HP P4800 G2 solution configurations: • Use your own system backup utility to back up data. • Back up the configuration to an FTP server. Backing up the SAS switch 13