HP Pavilion 15-au600 Maintenance and Service Guide - Page 39
Removal and replacement procedures for authorized service provider parts, Component replacement
View all HP Pavilion 15-au600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
6 Removal and replacement procedures for authorized service provider parts CAUTION: Components described in this chapter should be accessed only by an authorized service provider. Accessing these parts can damage the computer or void the warranty. CAUTION: This computer does not have user-replaceable parts. Only HP authorized service providers should perform the removal and replacement procedures described here. Accessing the internal part could damage the computer or void the warranty. Component replacement procedures NOTE: Details about your computer, including model, serial number, product key, and length of warranty, are on the service tag at the bottom of your computer. See Locating system information on page 14 for details. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. There are as many as 61 screws that must be removed, replaced, and/or loosened when servicing the parts described in this chapter. Make special note of each screw size and location during removal and replacement. Base enclosure Description Base enclosure In Natural Silver finish In Onyx Black finish In Modern Gold finish In Cardinal Red finish In Sport Purple finish In Dragonfly Blue finish In Blizzard White finish Spare part number 856332-001 856333-001 856334-001 856335-001 856336-001 856337-001 856338-001 Before disassembling the computer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. Remove the base enclosure: Component replacement procedures 29