HP Pavilion 15-au600 Maintenance and Service Guide - Page 44

SSD (M.2), Remove the SSD

Get HP Pavilion 15-au600 PDF manuals and user guides View all HP Pavilion 15-au600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 44 highlights

SSD (M.2) Description Solid-state drive board GNRC SSD 256GB 2280 M2 SATA-3 Value GNRC SSD 128GB 2280 M2 SATA-3 Value Solid-state drive cable Spare part number 856210-001 865902-001 847110-002 856353-001 Before removing the SSD, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the base enclosure (see Base enclosure on page 29), and then remove the following components: a. Battery (see Battery on page 31). b. Optical drive (see Optical drive on page 27). c. Hard drive (see Hard drive on page 32). Remove the SSD: 1. Remove the Phillips M2.0 x 2.5 screw (1) that secures the SSD to the system board. 2. Remove the SSD (2) by pulling the drive away from the slot at an angle. Reverse this procedure to install the SSD. 34 Chapter 6 Removal and replacement procedures for authorized service provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
SSD (M.2)
Description
Spare part number
Solid-state drive board
856210-001
GNRC SSD 256GB 2280 M2 SATA-3 Value
865902-001
GNRC SSD 128GB 2280 M2 SATA-3 Value
847110-002
Solid-state drive cable
856353-001
Before removing the SSD, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the computer
on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the base enclosure (see
Base enclosure
on page
29
), and then remove the following components:
a.
Battery (see
Battery
on page
31
).
b.
Optical drive (see
Optical drive
on page
27
).
c.
Hard drive (see
Hard drive
on page
32
).
Remove the SSD:
1.
Remove the Phillips M2.0 x 2.5 screw
(1)
that secures the SSD to the system board.
2.
Remove the SSD
(2)
by pulling the drive away from the slot at an angle.
Reverse this procedure to install the SSD.
34
Chapter 6
Removal and replacement procedures for authorized service provider parts