HP Pavilion 15-au600 Maintenance and Service Guide - Page 63
Speakers, I/O board see
View all HP Pavilion 15-au600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Speakers NOTE: The speaker spare part kit includes the cable. Description Speaker Kit Spare part number 856383-001 IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement. Before removing the speaker, follow these steps: 1. Shut down the computer. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the base enclosure (see Base enclosure on page 29), and then remove the following components: a. Battery (see Battery on page 31). b. Optical drive (see Optical drive on page 27). c. Hard drive (see Hard drive on page 32). d. Memory (see Memory on page 35). e. WLAN module (see WLAN module on page 38). f. Fan (see Fan on page 42). g. Heat sink (see Heat sink on page 43). h. I/O board (see I/O board on page 45). i. Power button board (see Power button board on page 46). j. System board (see System board on page 48). k. SD card reader board (see SD card reader on page 51). Remove the speakers: 1. Disconnect the right speaker cable (1). 2. Remove 1 Phillips 2x5 screw from the left speaker and 1 Phillips 2x5 screw from the right speaker (2). 3. Disconnect the left speaker cable (3). 4. Release the speaker cable from the routing channels (4) and (5). Component replacement procedures 53