HP Pavilion Media Center m7600 HP Media Center PC Getting Started Guide - Page 23
Connecting the TV Signal Source, Refer to HP Media Center PC Front Connectors
View all HP Pavilion Media Center m7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connecting the TV Signal Source Connect the signal source for the TV by using the TV In coaxial connector or the composite/S-video In connector. Plug the connector of a coaxial cable from your TV cable into the TV/Cable Ant connector on the back of the PC, and then turn the connector to tighten it. Or Plug a cable into the S-video or composite video In connector on the back of the PC; use an S-video cable (not provided) or the composite video cable. Plug the other end of the cable into your set-top box or other device that is providing the signal source for the TV. You must also plug audio cables (not provided) from your set-top box into the Audio In right (red) connector and the Audio In left (white) connector on the back of the PC, if you are using a set-top box with S-video or composite video output. Refer to "HP Media Center PC Front Connectors" on page 11. You must also connect the Remote Emitter cable if you are using a set-top box. See "Connecting the Remote Sensor" on page 21. n Location and number of connectors may vary by model. Connecting the Television Signal 19