HP Pavilion Media Center m7600 HP Media Center PC Getting Started Guide - Page 44
Connecting 4.1 (4 Speakers and a Subwoofer) Audio Speakers
View all HP Pavilion Media Center m7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
n Type 3 is three connectors. Type 6 is six connectors. Type S is sound card. n Always turn on the PC before you turn on the speaker system. Connecting 4.1 (4 Speakers and a Subwoofer) Audio Speakers To connect two front speakers, two rear speakers, and a subwoofer for four-channel (4.1 speaker) output: IN 1 Turn off the PC. 2 . Connect the front speaker cable to the lime green Audio Line Out connector that matches the back of your PC. 3 6 S OUT 3 Connect the rear speaker cable to the black connector that matches the back of your PC. 3 6 S 4 Connect the cables to the audio system. 5 Connect the front and rear speakers to the subwoofer. Refer to the speaker documentation. 6 Turn on the PC. 7 Plug in the speaker system power. 8 Turn on the speaker system. 9 After the speakers are connected to the PC, configure the audio software for sound output for your PC model: ■ Type 3: See "Configuring Audio Output with Multi-channel Sound Manager" on page 48. ■ Type 6: See "Configuring Audio Output with Sound Effect Manager" on page 50. For type 3-connector systems, the blue Audio Line In connector functions as a Rear Line Out when a multichannel audio configuration is activated. ■ Sound card: See "Configuring Audio Output with a Sound Card" on page 53. The following diagram shows a typical 4.1 audio installation: OUT IN 40 HP Media Center PC Getting Started Guide