HP Pavilion Media Center m7600 HP Media Center PC Getting Started Guide - Page 58
Disabling digital audio output with Sound Effect Manager (optional)
View all HP Pavilion Media Center m7600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Disabling digital audio output with Sound Effect Manager (optional) To disable digital audio output: 1 Open the Sound Effect Manager: Click Start, Control Panel, Sounds, Speech and Audio, and then Sound Effect Manager. 2 Click Audio Wizard. A window opens, displaying the connector panel on the front of the PC. 3 Click the Digital Audio button. Select Digital output off (you can also select Digital-in to Digital-out pass through mode). 4 Close the window. If you select Enable digital audio output, the microphone volume setting becomes active, the recording source is fixed in Stereo Mix, and if you place the microphone too close to the speakers, feedback can occur. n If you do not see the device for your configuration, change the speaker selection in the Speaker Configuration window. Configuring Audio Output with Realtek HD Sound Effect Manager Follow these steps after you have installed and connected your speakers, if your PC model has type 6 connectors and is capable of multi-streaming audio. To configure multichannel audio output for PCs with Realtek HD Sound Effect Manager: 1 Click Start on the taskbar. 2 Click Control Panel. 3 Click Sounds, and then Speech and Audio Devices (or Sounds and Audio Devices). 4 Click Realtek HD Sound Effect Manager. The window opens. 5 Click a button near the top of the window to see that control screen. 54 HP Media Center PC Getting Started Guide