HP Pavilion dv9300 HP Pavilion dv9000 Notebook PC - Maintenance and Service Gu - Page 176
Remove the two silver Phillips PM2.0×3.0 screws, secure the Bluetooth module to the base enclosure.
View all HP Pavilion dv9300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Removal and Replacement Procedures 2. Disconnect the Bluetooth module cable 1 from the system board. ✎ The Bluetooth module cable is included with the Bluetooth module spare part kit and is also included in the Cable Kit, spare part number 434677-001. 3. Route the Bluetooth module cable 2 under the system board. 4. Remove the two silver Phillips PM2.0×3.0 screws 3 that secure the Bluetooth module to the base enclosure. 5. Remove the Bluetooth module 4. Removing the Bluetooth Module Reverse the above procedure to install the Bluetooth module. 5-60 Maintenance and Service Guide
5–60
Maintenance and Service Guide
Removal and Replacement Procedures
2. Disconnect the Bluetooth module cable
1
from the
system board.
✎
The Bluetooth module cable is included with the Bluetooth
module spare part kit and is also included in the Cable Kit,
spare part number 434677-001.
3. Route the Bluetooth module cable
2
under the system board.
4. Remove the two silver Phillips PM2.0×3.0 screws
3
that
secure the Bluetooth module to the base enclosure.
5. Remove the Bluetooth module
4
.
Removing the Bluetooth Module
Reverse the above procedure to install the Bluetooth module.