HP Pavilion m4-1000 HP Pavilion m4 Notebook PC Maintenance and Service Guide - Page 39

Hard drive, and swing it up and forward until

Get HP Pavilion m4-1000 PDF manuals and user guides View all HP Pavilion m4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive connector cable. These components are included in the Hard Drive Hardware Kit, spare part number 718432-001. Description 1-TB, 5400-rpm, 9.5-mm 750-GB, 5400-rpm, 9.5-mm 500-GB, 5400-rpm, 9.5- and 7.0-mm Spare part number 676521-001 634250-001 683802-001 Before removing the hard drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 30). Remove the hard drive: 1. Loosen the Phillips PM2.5×4.5 captive screw (1) that secures the hard drive service cover to the computer. 2. Lift the rear edge of the hard drive service cover (2) and swing it up and forward until it disengages from the computer. 3. Remove the hard drive service cover. The hard drive service cover is included in the Plastics Kit, spare part number 718432-001. 4. Disconnect the hard drive connector cable (1) from the system board. Component replacement procedures 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Hard drive
NOTE:
The hard drive spare part kit does not include the hard drive bracket or hard drive connector
cable. These components are included in the Hard Drive Hardware Kit, spare part number
718432-001.
Description
Spare part number
1-TB, 5400-rpm, 9.5-mm
676521-001
750-GB, 5400-rpm, 9.5-mm
634250-001
500-GB, 5400-rpm, 9.5- and 7.0-mm
683802-001
Before removing the hard drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
30
).
Remove the hard drive:
1.
Loosen the Phillips PM2.5×4.5 captive screw
(1)
that secures the hard drive service cover to the
computer.
2.
Lift the rear edge of the hard drive service cover
(2)
and swing it up and forward until it
disengages from the computer.
3.
Remove the hard drive service cover.
The hard drive service cover is included in the Plastics Kit, spare part number 718432-001.
4.
Disconnect the hard drive connector cable
(1)
from the system board.
Component replacement procedures
31