HP Pavilion m4-1000 HP Pavilion m4 Notebook PC Maintenance and Service Guide - Page 46

Optical drive, Remove the Phillips PM2.5×4.5 screw

Get HP Pavilion m4-1000 PDF manuals and user guides View all HP Pavilion m4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

Optical drive Description DVD±RW Double-Layer with SuperMulti Drive Spare part number 718434-001 Before removing the optical drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 30). 5. Remove the memory module service cover (see Memory module on page 36). Remove the optical drive: 1. Remove the Phillips PM2.5×4.5 screw (1) that secures the optical drive to the computer. 2. Insert a flat-bladed screwdriver or similar tool into the optical drive tab access (2) and press the tab to the left to release the optical drive from the computer. 38 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
Optical drive
Description
Spare part number
DVD±RW Double-Layer with SuperMulti Drive
718434-001
Before removing the optical drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
30
).
5.
Remove the memory module service cover (see
Memory module
on page
36
).
Remove the optical drive:
1.
Remove the Phillips PM2.5×4.5 screw
(1)
that secures the optical drive to the computer.
2.
Insert a flat-bladed screwdriver or similar tool into the optical drive tab access
(2)
and press the
tab to the left to release the optical drive from the computer.
38
Chapter 5
Removal and replacement procedures for Customer Self-Repair parts