HP Pavilion m4-1000 HP Pavilion m4 Notebook PC Maintenance and Service Guide - Page 58
TouchPad button board, from the TouchPad. The TouchPad button board
View all HP Pavilion m4-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
TouchPad button board Description TouchPad button board (includes TouchPad button board bracket, TouchPad button board cable, and TouchPad board cable) Spare part number 718437-001 Before removing the TouchPad button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 30) and then remove the following components: a. Hard drive (see Hard drive on page 31) b. Memory module service cover (see Memory module on page 36) c. Optical drive (see Optical drive on page 38) d. Keyboard (see Keyboard on page 42) e. Top cover (see Top cover on page 45) Remove the TouchPad button board: 1. Detach the TouchPad button board cable (1) from the TouchPad. (The TouchPad button board cable is attached to the TouchPad with double-sided tape.) 2. Release the ZIF connector (2) to which the TouchPad cable is attached, and then disconnect the TouchPad cable from the TouchPad board. 3. Remove the two Phillips PM2.5×4.0 screws (3) that secure the TouchPad button board to the top cover. 4. Remove the TouchPad button board bracket (4). 50 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts