HP Photosmart 8400 HP Photosmart 8400 series Reference Guide - Page 17
Insert or replace the print cartridges, Remove the pink tape, Do not touch here - ink cartridges
View all HP Photosmart 8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Caution Check that you are using the correct print cartridges. Also, note that HP does not recommend modifying or refilling HP cartridges. Damage that results from modifying or refilling HP cartridges is not covered by the HP warranty. For best print quality, HP recommends that you install all retail print cartridges before the date stamped on the box. Insert or replace the print cartridges Prepare the printer and cartridges 1. Make sure the power is on and you have removed the cardboard from inside the printer. 2. Lift the main cover of the printer. 3. Remove the bright pink tape from all cartridges. Remove the pink tape Do not touch the ink nozzles or the copper-colored contacts, and do not re-tape the cartridges. Do not touch here Insert the cartridges 1. If you are replacing a cartridge, push down and pull outward on the cartridge stall cover to open it and then pull the cartridge out. 2. Match the symbol on the cartridge label to the correct stall. Hold the cartridge with the label on top and slide it at a slight upward angle into the stall so the copper-colored contacts go in first. Push the cartridge until it snaps into place. 3. Close the cartridge stall cover. 4. Repeat the previous steps to install the other cartridges, if necessary. 5. When you are finished installing cartridges, close the main cover. HP Photosmart 8400 series Reference Guide 15