HP Presario CQ45-300 Compaq Presario CQ45 Notebook PC - Maintenance and Servic - Page 55
lift the hard drive up and out of the computer, to slide the hard drive
View all HP Presario CQ45-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
3. Lift the left side of the hard drive cover (2), swing it to right, and remove the cover (3). The hard drive cover is included in the Plastics Kit, spare part number 486862-001. 4. Remove the three Phillips PM2.0×4.0 screws (1) that secure the hard drive to the computer. 5. Use the Mylar tab (2) to slide the hard drive (3) until it disconnects from the connector, and then lift the hard drive up and out of the computer (4). 6. If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.0 screws (1) that secure the hard drive bracket to the hard drive. Component replacement procedures 47
3.
Lift the left side of the hard drive cover
(2)
, swing it to right, and remove the cover
(3)
. The hard
drive cover is included in the Plastics Kit, spare part number 486862-001.
4.
Remove the three Phillips PM2.0×4.0 screws
(1)
that secure the hard drive to the computer.
5.
Use the Mylar tab
(2)
to slide the hard drive
(3)
until it disconnects from the connector, and then
lift the hard drive up and out of the computer
(4)
.
6.
If it is necessary to replace the hard drive bracket, remove the four Phillips PM3.0×4.0
screws
(1)
that secure the hard drive bracket to the hard drive.
Component replacement procedures
47