HP Presario CQ45-300 Compaq Presario CQ45 Notebook PC - Maintenance and Servic - Page 86

USB board, computer on, and then shut it down through the operating system.

Get HP Presario CQ45-300 - Notebook PC PDF manuals and user guides View all HP Presario CQ45-300 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 86 highlights

Remove the audio board: 1. Turn the computer upright with the front toward you. 2. Disconnect the audio board cable (1) from the system board. 3. Remove the cable from between the components that secure it in the base (2). 4. Remove the two Phillips PM2.5×3.0 screws (3) that secure the audio board to the computer. 5. Lift the rear edge of the audio board and swing it forward until the audio connectors disengage from the base enclosure. 6. Remove the audio board (4). Reverse the above procedure to install the audio board. USB board Description USB board USB board cable Spare part number 486842-001 486843-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 78 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
Remove the audio board:
1.
Turn the computer upright with the front toward you.
2.
Disconnect the audio board cable
(1)
from the system board.
3.
Remove the cable from between the components that secure it in the base
(2)
.
4.
Remove the two Phillips PM2.5×3.0 screws
(3)
that secure the audio board to the computer.
5.
Lift the rear edge of the audio board and swing it forward until the audio connectors disengage
from the base enclosure.
6.
Remove the audio board
(4)
.
Reverse the above procedure to install the audio board.
USB board
Description
Spare part number
USB board
486842-001
USB board cable
486843-001
Before removing the USB board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
78
Chapter 4
Removal and replacement procedures