HP Presario CQ45-300 Compaq Presario CQ45 Notebook PC - Maintenance and Servic - Page 78
Num lock light cable, and release from top cover clips
View all HP Presario CQ45-300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
3. Turn the computer right-side up, with the front toward you. 4. Disconnect the following cables from the system board: ● Bluetooth module cable (1) ● TouchPad cable (2) ● Fingerprint reader board cable (if equipped) (3) ● USB board cable (4) and release from top cover clips (5) ● Num lock light cable (6) 5. Remove the two Phillips PM2.5×7.0 screws (1) that secure the top cover to the computer. 6. Lift up the rear edge of the top cover until it releases from the base (2). 70 Chapter 4 Removal and replacement procedures
3.
Turn the computer right-side up, with the front toward you.
4.
Disconnect the following cables from the system board:
●
Bluetooth module cable
(1)
●
TouchPad cable
(2)
●
Fingerprint reader board cable (if equipped)
(3)
●
USB board cable
(4)
and release from top cover clips
(5)
●
Num lock light cable
(6)
5.
Remove the two Phillips PM2.5×7.0 screws
(1)
that secure the top cover to the computer.
6.
Lift up the rear edge of the top cover until it releases from the base
(2)
.
70
Chapter 4
Removal and replacement procedures