HP ProBook 4420s HP ProBook 4320s, 4321s, 4420s, and 4421s Notebook PCs - Mai - Page 104
Modem module cable
View all HP ProBook 4420s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Modem module cable NOTE: The modem module cable with RJ11 connector is included in the Cable kit on page 32, part number 599525-001. Before removing the modem module cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 49). 5. Remove the following components: a. Switch cover (see Switch cover on page 51) b. Keyboard (see Keyboard on page 53) c. Optical drive (see Optical drive on page 57) d. Speakers (see Speakers on page 60) e. Palm rest (see Palm rest on page 64) f. Hard drive (see Hard drive on page 66) g. Display assembly (see Display assembly on page 81) h. Top cover (see Top cover on page 89) i. System board (see System board on page 93) j. USB connector board and cable (see USB connector board on page 94) Remove the modem cable. 1. Position the computer right-side up with the front toward you. 2. Release the modem RJ11 connector from the base enclosure clips (1). 96 Chapter 4 Removal and replacement procedures