HP ProBook 4420s HP ProBook 4320s, 4321s, 4420s, and 4421s Notebook PCs - Mai - Page 92
Flex the bottom of the bezel from the inside edge until it disengages from the display back
View all HP ProBook 4420s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
4. If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the four Mylar screw covers (1) and the four T8 slotted-Torx M2.5×6.0 screws (2) that secure the display bezel to the display assembly. The screw covers are available in the rubber kit, spare part number 599564-001. 5. Remove the bezel: a. Flex the top of the bezel from the inside edge until it disengages from the display back cover (1). b. Flex the bottom of the bezel from the inside edge until it disengages from the display back cover (2). c. Flex the inside edge of the left side and the right side of the bezel until it disengages from the display back cover (3). d. Remove the display bezel from the display back cover (4). 84 Chapter 4 Removal and replacement procedures