HP ProBook 4535s HP ProBook 4535s Notebook PC - Maintenance and Service Guide - Page 74
Quick Launch board, Top cover see
View all HP ProBook 4535s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Quick Launch board Description Quick Launch board Spare part number 646296-001 Before removing the Quick Launch board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the following components: a. Bottom door (see Bottom door on page 42). b. Optical drive (see Optical drive on page 43) c. Keyboard (see Keyboard on page 56) d. Top cover (see Top cover on page 58) e. Speakers (see Speaker assembly on page 64) Remove the Quick Launch board: 1. Position the top cover upside-down with the front toward you. 2. Remove the two Phillips PM2.5×5.0 screws (1) that secure the board to the top cover. 3. Remove the cable (2) from the adhesive that secures it to the top cover. 66 Chapter 4 Removal and replacement procedures