HP ProBook 4535s HP ProBook 4535s Notebook PC - Maintenance and Service Guide - Page 80
USB board
View all HP ProBook 4535s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
USB board Description USB board Spare part number 646287-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the following components: a. Bottom door (see Bottom door on page 42). b. Optical drive (see Optical drive on page 43) c. Keyboard (see Keyboard on page 56) d. Top cover (see Top cover on page 58) Remove the USB board: 1. Position the computer upright with the front toward you. 2. Lift the system board connector latch(1), and then disconnect the USB board cable from the system board (2). 3. Remove the two Phillips PM2.5×5.0 screws (3) that secure the USB board to the computer. 72 Chapter 4 Removal and replacement procedures