HP ProBook 4535s HP ProBook 4535s Notebook PC - Maintenance and Service Guide - Page 94
Power cable
View all HP ProBook 4535s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Power cable The power cable is included in the Cable Kit, spare part number 646303-001. Before removing the power cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the following components: a. Bottom door (see Bottom door on page 42). b. Hard drive (see Hard drive on page 45) c. Optical drive (see Optical drive on page 43) d. WLAN module (see WLAN/Bluetooth combo card on page 51) e. WWAN module (see WWAN module on page 49) f. Fan (see Fan on page 80) g. Heat sink (see Heat sink on page 82) h. Keyboard (see Keyboard on page 56) i. Top cover (see Top cover on page 58) j. System board (see System board on page 75) Remove the power cable: 1. Position the computer upright with the front toward you. 2. Remove the cable from the routing clamp (1). 86 Chapter 4 Removal and replacement procedures