HP ProBook 4535s HP ProBook 4535s Notebook PC - Maintenance and Service Guide - Page 82
RJ-11 jack cable, Remove the RJ-11 jack cable - base system device
View all HP ProBook 4535s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
RJ-11 jack cable NOTE: The RJ-11 jack cable is included in the Cable Kit, spare part number 646303-001. Before removing the RJ-11 jack cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). 5. Remove the following components: a. Bottom door (see Bottom door on page 42). b. Optical drive (see Optical drive on page 43) c. Modem module (see Modem module on page 69) d. Keyboard (see Keyboard on page 56) e. Top cover (see Top cover on page 58) f. USB board (see USB board on page 72) Remove the RJ-11 jack cable: 1. Position the computer upright with the front toward you. 2. Remove the tape (1) that secures the cable to the computer. 3. Remove the RJ-11 jack cable from the clips and routing channel (2) built into the base enclosure. 74 Chapter 4 Removal and replacement procedures