HP ProLiant DL380p HP ProLiant Servers Troubleshooting Guide - Page 144

Temperature Violation Detected. - Waiting 5 Minutes for System to Cool

Get HP ProLiant DL380p PDF manuals and user guides View all HP ProLiant DL380p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 144 highlights

again if a battery failure has occurred. However, the system will function and retain configuration settings if the system is connected to the AC power source. Action: Replace battery (or add external battery). 1610-Temperature Violation Detected. - Waiting 5 Minutes for System to Cool ...Press Esc key to resume booting without waiting for the system to cool. WARNING: Pressing Esc is NOT recommended as the system may shutdown unexpectedly. Audible Beeps: None Possible Cause: The temperature measured by one of the system temperature sensors has exceeded acceptable levels. In many cases, this is due to the ambient inlet air temperature exceeding acceptable levels. Action: Be sure to follow all of the environmental requirements for the server. • Space and airflow o Always allow adequate ventilation. o Always populate the racks with blanking panels and the enclosures with blade blanks. o Always populate the server with air baffles, blanks, and heatsinks. o Always operate the server with the access panel installed. • Temperature Only operate the server in a room where the temperature does not exceed the recommended temperature for the server. For more information about the optimum environment for the server, see the server user guide on the HP website (http://www.hp.com/support). 1611-CPU Zone Fan Assembly Failure Detected. Either... ...the Assembly is not installed or multiple fans have failed in the CPU zone. Audible Beeps: None Possible Cause: Required fans are missing or not spinning. Action: 1. Check the fans to be sure they are installed and working. 2. Be sure the assembly is properly connected and each fan is properly seated. 3. If the problem persists, replace the failed fans. 4. If a known working replacement fan is not spinning, replace the assembly. 1611-CPU Zone Fan Assembly Failure Detected. Single fan... ...failure. Assembly will provide adequate cooling. Audible Beeps: None Possible Cause: Required fan is not spinning. Action: Replace the failed fan to provide redundancy, if applicable. Error messages 144

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
Error messages 144
again if a battery failure has occurred. However, the system will function and retain configuration settings if
the system is connected to the AC power source.
Action
: Replace battery (or add external battery).
1610-Temperature Violation Detected. - Waiting 5 Minutes for System to Cool
...Press Esc key to resume booting without waiting for the system to cool.
WARNING: Pressing Esc is NOT recommended as the system may shutdown unexpectedly.
Audible Beeps
: None
Possible Cause
: The temperature measured by one of the system temperature sensors has exceeded
acceptable levels. In many cases, this is due to the ambient inlet air temperature exceeding acceptable levels.
Action
: Be sure to follow all of the environmental requirements for the server.
•
Space and airflow
o
Always allow adequate ventilation.
o
Always populate the racks with blanking panels and the enclosures with blade blanks.
o
Always populate the server with air baffles, blanks, and heatsinks.
o
Always operate the server with the access panel installed.
•
Temperature
Only operate the server in a room where the temperature does not exceed the recommended
temperature for the server.
For more information about the optimum environment for the server, see the server user guide on the HP
website (
).
1611-CPU Zone Fan Assembly Failure Detected. Either...
...the Assembly is not installed or multiple fans have failed in the CPU zone.
Audible Beeps
: None
Possible Cause
: Required fans are missing or not spinning.
Action
:
1.
Check the fans to be sure they are installed and working.
2.
Be sure the assembly is properly connected and each fan is properly seated.
3.
If the problem persists, replace the failed fans.
4.
If a known working replacement fan is not spinning, replace the assembly.
1611-CPU Zone Fan Assembly Failure Detected. Single fan...
...failure. Assembly will provide adequate cooling.
Audible Beeps
: None
Possible Cause
: Required fan is not spinning.
Action
: Replace the failed fan to provide redundancy, if applicable.